Product included:

 

               NINJA 400 helicopter ; 18A brushless controller ; head locked gyro ;four servos; 4500KV brushless
       motor ; 7ch TX/RX;11.1V 1100mAh LI-PO battery and balance charger;Color fiber canopy

 

               NINJA 400 is suitable for the beginner and expert due to the small body can fly 3D and rolling, dive,
       inversed flying perfectly, With the import aluminum alloy and 3K silver fiberglass  body,  NINJA 400 can be
       ensured to fly with maximum performance. Its CNC rotor head parts allow any 3D flight maneuvers. Its
       design depends on handiness combining with modern electrical components technology.NINJA 400
       needs 7 channel computer radio controls to support 120 degree of CCPM operation . High precision
       main rotor assembly

      
              NINJA 400 will bring you endless pleasant surprise , it can bring you happy, exciting, adventurous 3D
       flying experience.

  

Feature:

     7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control

       (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set

    High Performace 4500KV Outrunner Brushless Motor used as the main drive and makes the flight

        much stable and better performace

       Can fly in skyway, backward, and 3D aerobatic 
       120 degree PPM system provides precise movement if comparing with the traditional mechanical
    mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced

       Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing

      Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic
    responds

       The autorotation landing system, made of high quality one-way bearing, maximally protects your
   helicopter from damage

        Brand new design for the structure

        Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of 
   f lying

        Tail rotor driven by belt provide stable flight and low noise

        NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter

        With length-adjustable servo push-rod, precision sub trim can be easily set

        No need to worry about burning tail motors

        Separate main shaft and main gear reduce repair time and noise

        Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the
    load of whole helicopter

        Easy to fly and more stable lifting

        11.1V 1100mAh high capacitance Li-Po battery provide enough power for any aerobatic flight

         Provide excellent performance outdoor and indoor

         Tail blade adopt flameout landing system

         Newly Designed Rotor Head gives better control and easy to install Extreme smooth control and stable
    flight

         Precise controlling and hovering

         Suitable for Indoor/Outdoor/Backyard/Stadium

         Using the Ultra tough Firberglass materials, which is extremely light and not easily break ,the
    Helicopter   does have very strong structure.

          Approximately 15 minutes flight time on each charge - 7Optional Li- poly battery will help to achieve
     better performance and longer flight time.

          Best choice for Beginner - Advanced hobbyist

 

 

        Specification:

              main rotor diameter:  580mm

              main motor type:      BL 4500kv

              main body length:      550mm

              Average flight time:   app:10min

              Flight Weight :               440g

              Battery type :         11.1V 1100mAh LIPO

              Radio system :        7ch

              Main Rotor RPM:       3000