180 Degree Servo.

The new HXT servos only need a small voltage (4.8v) to reach high torque loads!

Item No: SSV-9320MG-180
Weight:  20.2grams / 0.72oz.
Dimensions: 26 x 13 x 26 mm / 1.15 x 0.50 x 1.05 inch
Torque: At 4.8V: 3.8kg/cm , 52 oz/in
Speed: At 4.8V: 0.15sec / 60 deg at no load
Running Current:360mA
Stall Current:  920mA
Horn Spline: 25 Segments
Connector Wire Length: 160mm (6.29in)
Connector Horsing: Futaba connector
Ball Bearing: One ball bearing on the top
Gear Types: Metal Gear

This servo is the same spec as the 9320MG, however it is rotates 180degree.
IT IS NOT A PROPORTIONAL SERVO. IT WILL ROTATE 180 DEGREES ONLY. ONLY TO BE USED FOR ON/OFF APPLICATIONS WHERE FULL TRAVEL IS REQUIRED.