No products
View larger (SKU): 558659
In stock
Eachine Chaser88 Betaflight F3 FPV Racer ARF with 4 In 1 6A Dshot ESC 5.8G 40CH VTX 800TVL 1/3 Cmos Camera
| Specification | Features | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Chaser88 Frame | Package : 215×110×265mm Weigh(without battery): 67g Weight (with battery): 90g Package Weigh: 215g | Compatible with 2030 inches propeller Compatible with 1103 motor Can be used with 2-3S battery Wheelbase: 88mm Flight time: 3.5mins Batterry: 2S 45C 450mah With direction indicator LED | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ESC | Model: BLHELI-S 6A Continuous Current: 6A Instantaneous Current(10S): 10A BEC: NO Li-Po Battery: 1-2S Programming: Yes Weight: 5G Size(PCB): 27 x 27mm M3 install Pitch: 20 x 20mm Support DSHOT600 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Motor | 1103 10000KV Voltage: 11.1V Power: 64.4W Prop: 2 inches Efficiency: 1.4 g/w Load current: 5.8A Lipo cell: 1-3s Pull: 90g Weight: 3.7 g | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Flight Controller | F3 Mini Firmware version: bf 1.3.1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 800TVL Camera | Sensor: 1/3 "CMOS Lens: M8 800TVL Lens Angle: 150 ° FOV horizontal viewing angle of 170 ° DFOV diagonal perspective Format: NTSC / PAL (switchable) Resolution: NTSC: 960X480/ PAL:960X480 Power consumption: 380mA @ 3.7V Power: 3.6-5.5V Lens Mirror Diameter: 2.1mm IR coated FOV150 (horizontal) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| FPV Transmitter | Support video format: NTSC / PAL Output Impedance: 75 Ohm Output signal strength: 23 ~ 24dBm Output Power: 25mW Wireless Channel: 40CH Antenna: RHCP circular polarization clover leaf antenna Operating voltage: 3.6V ~ 5.5V Current: 100mA Audio carrier: 6.5MHz Button function Short press (Apr. 1 sec or less): Change channels 1-8 Long press (More than 1.5 sec): Change bands A-B-E-F-R Long + press (More than 3 sec): Change NTSC/PAL system NTSC or PAL (selectable; Blue LED on= NTSC; Blue LED off=PAL)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||