Κανένα προϊόν
RGB RF Controller Molex 3Pin 5V LED Light Power Supply 4Pin 12V D-RGB Splitter Interface SYNC Hub PWM
Διαθέσιμο
4PIN 24 key remote control RGB controller:
Computer chassis dedicated interface, Power supply Molex 4Pin, 12v 4Pin header , input end line length 30cm.RF24 button 2.4G RF remote control, 360 degrees without dead angle. Compatible with motherboard 4 pin plug all RGB strips, strips, modules.
3PIN 17 key remote control RGB controller:
It adopts Molex 4Pin 3PIN interface, compatible with computer motherboard plug, input interface line sequence +5v, DA, GND, input power terminal adopts Molex 4pin interface universal, RF remote control, distance up to 8-25 meters, operation is sensitive and user-friendly, wiring is simple and convenient Support for custom single- and double-line LED driver ICs on the market; with more than 300 kinds of pattern effects, colorful.
3PIN Controller working voltage: DC5V-24V universal
Current: up to 6A, up to 2048 pixels, power input with reverse connection
The controller will automatically save the user's key settings every time. After the breakpoint, the next time the power-on controller will run according to the original settings.
Product Specifications:
Working temperature: -20-60 °C
Supply voltage: DC5V--24V optional
Output: 3 loop
Connection method: Anode
Maximum load current: 2A per way
Output power: 5V<30W, 12V<72W, 24V<144W
Note:
1 When switched to dynamic mode, the brightness rises to speed plus, the brightness decreases to speed minus, there are 100 speed files;
2 when the last state is press FADE or SMOOTH, press FLASH and STROBE The key is invalid. Only when the last state is static mode, FLASH and STROBE are valid.
3 When FADE is used as the three-color gradient, press FADE again to change to seven-color gradient. When pressing SMOOTH for three-color transition, press SMOOTH again. It becomes a seven-color jump.
Features:
1. Support ASUS / MSI / ASRock / other motherboards, the line is quite plug-in function
2. The line is RGB split line, not a fan split line, and does not support the motherboard fan (FAN) interface! ! !
3. If use for RGB fan is, please make sure the interface is consistent or can be connected.