Notice:

The first time you use it, you need to activate the board first!

Activation Method

1. Charge activation

2. Or the B- and P- wires can be short-circuited once

Discharge

1. Over-discharge voltage of single battery: 2.0V±0.08V

2. Single battery over-discharge recovery voltage: 2.5V±0.08V

3. Over-discharge delay: 0.5S-1.0S

4. 15A version instantaneous protection current: 40A

5. 20A version instantaneous protection current: 50A

6. 25A version instantaneous protection current: 65A

7. 15A version continuous working current: 15A

8. 20A version continuous protection current: 20A

9. 25A version continuous protection current: 25A

10. Overcurrent recovery conditions: charging recovery or disconnecting the load

11. Short circuit recovery conditions: charging recovery or disconnecting the load

Charge

1. Overcharge voltage of single battery: 3.65V±0.025V

2. Single battery overcharge recovery voltage: 3.55V±0.025V

3. Overcharge delay: 0.5S-1.0S

4. 15A version instantaneous protection current: 15A

5. 20A version instantaneous protection current: 20A

6. 25A version instantaneous protection current: 25A

7. 15A version continuous charging current: 12A

8. 20A version continuous charging current: 15A

9. 25A version continuous charging current: 20A.

10. Charger voltage: 22V (recommended)

Features

1. Balance voltage: 3.55V±0.025V

2. Balance current: 40MA (maximum)

3. Charging high temperature: 50℃

4. Charging low temperature: -2℃

5. Discharge high temperature: 70℃

6. Discharge low temperature: no

7. Wiring method: same port

8. The total negative pole of the battery pack: connect to B-

9. Charge and discharge negative electrode: connect to P-

10. Charge and discharge positive pole: connect to the total positive pole of the battery pack

11. Working power consumption: ≤40uA

12. Main circuit conduction internal resistance: ≤10mΩ

13. Temperature range: -40 to +80℃

14. Disconnection protection: yes

15. Cable size: 7 lines - 400MM long

16. Product appearance size: 61*33*7MM