Li-ion Lithium Battery 18650 Charger PCB BMS 18.5V Cell Protection Board 5S

• 5S 21V 18V
• Specifications:
  Charging voltage: 21 V
  Charge MOS pressure value: 35 V
  Discharge MOS pressure value: 35 V
  Charging current: 56 A
  Continuous discharge current: 15 A
  Over current protection: 50/55/60 A
  Over current protection delay: 20/25/30 mS
  Single section since the power consumption:30 uA
  Single section between the power consumption:3 uA
  Single section over charge detection voltage:4.18- /4.22V
  Over charge recovery voltage 4.05- 4.15 V
  Over charge detection delay:0.5/1.0/2.0S
  Single section over discharge detection voltage:2.75-2.85 V
  Over discharge recovery voltage:2.90-3.20 V
  Over discharge detection delay:0.5-2.0S
  Short / over / over current protection recovery short circuit / over discharge / over current protection after removal of load auto recovery
  Short circuit protection delay 200/500/600 uS
  The normal working state of B- to P- resistance:5 mΩ
  Continuous 15A current maximum temperature rise:25 ℃
  Working environment (humidity) relative humidity: ≥98% (long-term stability under the humidity)
  Working environment (temperature) -30 ~ 80℃(in the lower temperature range of long-term stability)
  Size: 6.1x2.2cm/2.40x0.87inch 
  Quantity: 1 Set