Το AriesRc.gr χρησιμοποιεί cookies για να προσφέρει καλύτερη εμπειρία χρήστη και σας συνιστούμε να δεχτείτε τη χρήση τους για να απολαύσετε πλήρως την πλοήγησή σας.

BMS

Κατασκευαστές

Πληροφορίες

4S 16V 12A PCB BMS Protection Board For 18650 Li-ion Lithium Battery Cell Μεγαλύτερη προβολή

4S 16V 12A PCB BMS Protection Board For 18650 Li-ion Lithium Battery Cell

(SKU): HX-4S-A01

Διαθέσιμο

5,00 €

Άλλες πληροφορίες

  • 4S 16V 12A
  • 4 series 18650 battery 16.8V 16V 14.8V
    14.8V (Li-ion 18650 or li-ion battery rated voltage)
    16.8V (Li-ion battery full charge voltage)
    14.4V ( Lipo battery pack rated voltage)

    The lithium battery protection board is not included the welding tabs.

    Features:
    1) high-accuracy voltage detection circuit;
    2) terminal of the charger using high voltage device;
    3) Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit);
    4) MOS transistor can control the battery charge and discharge;
    5) low standby current consumption.

    P+/P- input/output interface, the same combination when the battery voltage, capacity, internal resistance should be matched well, combination without ouput, after the completion of voltage charging activation by 16.8V

    Specifications:
    Over Charge Voltage:4.25-4.35v±0.05v
    Over Discharge Voltage: 2.3-3.0v±0.05v
    Max Peak current: 6-8A
    Max instantaneous current: 12A
    Working Temperature: -40~+50℃
    Storage Temperature:-40~+80℃
    Static current: <30uA
    Life cycle: >50000hours
    Resistance: <100mΩ
    Charging Voltage: 16.8-17V
    Short cut Protection:Protectable ,change for repair
    Size: 7.2x1.3cm
    /2.83x0.51inch
    Quantity: 1 Pc
  • 1A40527.jpg